In this blog we want to share with you about wood burning (pyrography) tips. Wood burning or pyrography is the process of applying heat to wood can burn marks and decoration into wood. By using basic tools such as a soldering iron this method can create works of art from timber.
Browse this article:
Wood burning (pyrography) tips
Here are a couple of tips that will help boost your efficiency and make things easier.
Begin with samples
Though you might be tempted to jump into the project right away, the first thing you should do is begin with small samples. The last thing you want to do is keep wasting blocks of timber because they didn’t react well to the heat and got charred. By testing small chips of timber you can easily ascertain how they react and might even get new design ideas in the process.
Another benefit of working with samples is that it allows for getting familiarized with the timber you’ll be using for the project, reducing the chances of making mistakes when you finally start to work on it.
Choose the right timber
If you’re just starting off in wood-working, chances are that you still haven’t mastered picking the right material for your project yet. Doing so requires experience which is gained by practice. What material you choose greatly impacts the look and quality of the final results, so its importance cannot be understated.
For a rookie, starting off wood burning by choosing timber that burns easily such as pine and aspen is a good idea. Generally you want to be choosing dry, well-seasoned wood for wood-burning projects. Hard wood requires more time and effort to get the desired effect, so practicing on lighter wood at first is a good idea.
If it is possible use pyrography pens
While the soldering iron is definitely the go-to wood burning tool, if you want to create finer details and have more control, using pyrography pens is the perfect solution. Pyrography pens provide you with a wide variety of options in terms of patterns and thickness, which allows for complex designs.
Another major advantage of using pyrography pens is that the tips can be swapped out in the middle of the process, allowing you to keep working uninterrupted. You can just swap one out when it gets overheated and then switch back to it when it gets cooled as the current one gets heated.
Start with easy projects
It’s better to just start with easy projects. Complex designs involve adding multiple layers to the project which you won’t get right immediately. So, it’s better to start working on light and simple designs, gradually ramping up their complexity as you gain more experience.
The trick is to ensure that the first lines should be drawn lighter, adding heavier layers as you progress. Doing so minimizes your chances of making mistakes and improves your understanding of design principles.
Heat Blowers are another great wood-burning tool that can help you create some detailed and amazing designs. Heat blowers specialize in creating detailed and interesting backgrounds that would be difficult to recreate with a soldering iron.
They even allow you to create a vignette effect if you want by just passing it along the edges of your canvas. This allows you to create a 3D effect.